内容发布更新时间 : 2025/8/11 3:44:41星期一 下面是文章的全部内容请认真阅读。
外文文献
structural Design of Asphalt Pavement for
Low Cost Rural Roads
1. College of Transportation, Southeast University, Nanjing 210b9b, China 2. College of Civil Engineering, Nanjing University of Technology, Nanjing 210009, China
In developing countries，rural road construction is mostly cumbered by
shortage of funds. Engineers concerns most in rural areas is how to build roads which not only cost less but also meet the traffic demands. Especially in vast rural areas of China, there are a great variety of transportation patterns, and the traffic composition is very complex. Compared with other countries，the traffic composition in China rural areas have its own features. Therefore，there is no experience about the rural roads construction for reference. In recent years，the central government of China has increased the strength for rural road construction. At the same time，a lot of researches about rural road construction have been done by researchers in China, and some conclusions about china rural roads have been made. In the authors' opinion，the selection of the pavement structure material is the key measure to reduce the construction cost of rural roads after the route has been determined. Compared with concrete pavement，asphalt pavement relatively costs less and is the first choice for rural roads in China. And then，according to the research achievements about rural roads construction，the authors have done some preliminary researches on the structure design for low-cost asphalt pavements for rural roads.
1
1 Traffic Composition of Rural Road
Rural roads include county roads，town roads and village roads.
The traffic on rural roads is usually mixed. On a county road, traffic volume is between 300 to 1500 veh/d in average，and in a county with a developed economy，it reaches 1000 to 2 000 veh/d. The traffic volume between county and town is 100 to 300 veh/d，and the traffic volume between towns is usually less than 100 to 300 veh/d. In a mixed traffic flow，trucks account for 40% to 70% of the traffic volume, which are mainly light trucks carrying less than 2. 5 tons(including agricultural vehicles such as electro-tricycles，walking tractors etc.)and medium-size trucks of 2. 5 to 5 tons. Most of these light or medium trucks are overloaded. The proportion of heavy truck is less than 9%.On some roads to counties，the proportion of overloaded trucks is 5% to 32 %，while on some county roads connecting to national or provincial trunk highways，the proportion of overloaded vehicles usually amounts to 20% to 32% .
The traffic volume on rural roads is not heavy. However，considering the practical situation in China, as well as the exitence of overloaded vehicles，100kN，or BZZ-100 was adopted as standard axle load in the research. The pavement deflection or the flexural-tensile stress at the bottom of asphalt surface is taken as the design parameter. The axle load was calculated in
accordance with the following formula: Ns?C1C2(Pi/Ps)4.35 Ni和-the axle weight of an i-level axle in kN and the action frequency;
-the axle weight of standard axle in 100 kN and the action frequency; If the distance between axles is less than 3 m， axle loads are calculated as a double-axle or multi-axle loads，and
If the flexural-tensile stress at the bottom of semi-rigid base is taken as the design parameter, the axle load is calculated in accordance with the following formula:
2
If the distance between axles is less than 3m，
2 Traffic Volume on Rural Roads
Minibuses are adopted as the standard vehicle for the design of rural roads. Table 1 shows its external dimensions.
Table 1 External dimensions of the passenger car m
Length Width Height Front overhang Distance between axles Rear overhang
6.0 1.8 2.0 0.8 3.8 1.4 The typical vehicle types on rural roads are listed in Table 2. And others
such as non-power-driven vehicles，animal-drawn vehicles，and bicycles can be taken into account in the calculation of traffic volume on rural roads，in view of their roadside interference.
In accordance with the traffic composition and volumes，rural roads are divided into five grades. The traffic volume of each grade is shown in Table 3.
Traffic volume specified in Table 3 was obtained by taking the minibus as
the standard vehicle type,and converting different types vehicles according to the vehicle conversion coefficients given in Table 2.In Table 3，
Ne?365Ns?1????1t????
Ne refers to the cumulative equivalent axle load action frequency;
Ns refers to the equivalent axle load action frequency in the designed traffic lane in the beginning operation period of rural roads;
y refers to the average annual growth rate of traffic volume;
η refers to lane coefficient, and 1.0 for a single lane and 0. 6一0. 7 for a dual lane.
3 Strength of Roadbed
The modulus of resilience of roadbed varies greatly. For convenience，the strength of roadbed can be divided into four classes according to its moisture content and modulus of resilience，as shown in Table 4.
The parameters in Table 5 are determined by combining design principles
3
with practical experience. By applying elastic multilayer theory to the pavement structure specified in Table 5，the influence of Ne on the pavement thickness of rural roads was analyzed，and the result show that for given h，h2，E0，the roadbase thickness for neighboring traffic classes changes in a range of 4-5 cm. This result indicates that the classification of traffic volume on rural roads shown in Table 3 is reasonable and feasible in terms of the design and construction of asphalt pavement structures.
By using the elastic multilayer theory，the asphalt pavement structure of ordinary rural road in Table 5 is analyzed. When Ne，the cumulative equivalent axle load action frequency，the thickness of road surface(h =3 cm)，and the thickness of subbase(h2 = 20 cm ) remain the same , the influence of neighboring roadbed strength classifications on the thickness of roadbase is 3 cm一5 cm. This conclusion indicates that the strength classification of roadbed is reasonable and applicable to the design and construction of asphalt pavement structure.
4 Determination of Thicknesses of Asphalt Pavement Structure Sensitivity analysis of the design parameters of roadbed and pavement structures is to find out the relationship between structural strength of asphalt pavement structure and the design parameters of each layer, and determine the most sensitive layer in the pavement structure. The asphalt pavement structure of rural roads is generally composed of a road surface, a roadbase，and a subbase，as shown in Table 6. The pavement structure was analyzed according to elastic multiplayer theory under the double circular uniform load，with an assumption that there is continuous contact between the adjacent layers of the asphalt pavement structure. The basic parameters used in the calculation and analysis of asphalt pavement structure are listed in Table 7. By analyzing the effects of the change of all the parameters of pavement structure on the distortion of the road surface，roadbase，and roadbed , the following conclusions have been drawn.
(1)Increasing the thickness of the road surface effectively decreases the road surface deflection，but raises the cost. The comparatively economical and effective method is to increase the thickness of the subbase, which is superior to increasing the thickness of roadbase，while increasing the thickness of the road surface is the last choice.
4
(2)As the thickness of pavement structure increases，the change of road surface deflection will trend to be gentle. When the thickness of road surface reaches a certain value，the variance in the road surface deflection will not be obvious，and then it is ineffective to enhance the bearing capacity of asphalt pavement structure by increasing the thickness of road surface. It is recommended that the thicknesses of the roadbase and the subbase should be equal to or larger
than 18 and 20 cm, respectively，in design of asphalt pavement structures of rural roads. Fig. 1 shows the effects of the changes in the thickness of each layer on road surface deflection.
(3)Road surface deflection is very sensitive to the change of modulus of the roadbed. The increase in the modulus of roadbase or subbase is also effective to decrease the deflection of the road surface. On the other hand，the deflection of the road surface decreases gradually when the modulus of the surface increases，being the least effective factor. When the modulus of the road surface increases to a certain value， decrease in road surface deflection is not apparent. Fig. 2 shows the effect of the modulus of each layer on road surface deflection. From the above discussion，we conclude that the most sensitive layer for road surface deflection is subbase，and the next is roadbase. To decrease the road surface deflection of low-cost rural roads，the strength and stability of the roadbed should be enhanced, and the materials with a certain thickness and relatively high density should be used to pave the subbase.
The traffic volume or the accumulative equivalent axle load action times(frequency)within the designed life of road is used to determine the type and thickness of the asphalt pavement road surface, and the results are listed in Table 8，where veh/d means the number of the equivalent the passenger cars per day.
For a low traffic volume rural road with Ne 500 000，graded broken stones(or gravel)can be used as a flexible base. The flexible base has good strength and effectively prevents reflection cracks of the asphalt pavement road surface, provided the graded broken stones(or gravel ) meets the requirements for high density(degree of compaction ,100%. To ensure the sufficient strength and stability of the flexible base，its thickness is not less
5